- Home
- ยป
- Product Portfolio
- »
- Decorative Insulation Material
Decorative Insulation Material
Decorative Insulation Material offered by us are well known for their quality and durability. These Insulating Materials are fabricated by using qualitative raw material. These Insulating Materials are appreciated in the worldwide market. These Insulating Materials are offered at the market leading prices.
Roof Insulations, Under Deck Insulation, Duct Insulation(Hvac), Thermal Insulation,Pipe Insulation
Get Latest Price
Product Brochure
Product Details:
Material | Foam |
Thickness | 9 mm |
Size | 3mm to 50 mm |
Surface Treatment | Aluminum foil |
Brand | Aerolam |
Temperature Range | -122 to 230 (-50 deg C 110 deg C) |
Total Thickness | 4.5 to 5 mm |
Bubble Size | 4 mmx10 mm |
Reflection Ratio | 95% |
Roll Size | 1.2 mx40 m (WxL) |
Thermal Resistance Emissivity | 0.04-0.05 |
Features:
- Resistance against temperature
- Zero maintenance
- Fully insulated
Application:
- Roof Insulation
- Rafter Insulation
- HVAC Insulation
- Home Insulation (Attics & Floor)
- Pre Engineered Building Under-roof Insulation
Additional Information:
- Delivery Time: 1 week
Get Best QuoteRequest A Callback
Radiant Roof Insulation
Get Latest Price
Product Details:
Brand | Aerolam |
Nominal Thickness | 4 mm to 5 mm |
Roll Size | 1.2 Mtr x 40 Mtr" (w x l) |
Bubble Size | 4 mm x 10 mm |
Temperature Range | -122 f to 230 f (-50 deg C to 110 deg C) |
Reflection Ratio | 95% |
Thermal Resistance Emissivity | 0.04 - 0.05 |
Features:
- Reliability
- Easy installation
- Longer service life
Functions:
- This single bubble insulation or double bubble insulation material can be installed on roof, wall or floor. It can resist over 80% heat outside the building and protect the building from shock and sudden change of the temperature
Characteristics:
- No odor and toxicity, environmentally-friendly
- Light, soft, dust free, fire retardant and easy to install
- Heat reflection, heat insulation, sound insulation, counter radiation, counter vibration and shielding
- Higher heat resistance during summer. Also gives moisture barrier, sun protection, waterproofing and energy saving that consumed by cool air conditioning
- During Winter: heat protection, remarkable energy saving consumed by warm air conditioning
Usage:
- Roof, wall, floor
- Shells of air conditioning and water heater
- Protective coatings of water pipe and ventilating pipe
Get Best QuoteRequest A Callback
Insulation Sheets
Get Latest Price
Product Details:
Minimum Order Quantity | 5000 Square Meter |
Brand | Aerolam |
Temperature Range | -122 F to 230 F (-50 deg C to 110 deg C) |
Reflection Ratio | 97% |
Thermal Resistance Emissivity | 0.04-0.05 |
Total Thickness | 4.5 To 5 MM |
Roll Size | 1.2m X 40m (W X L) |
Bubble Size | 4MM X 10 MM |
Features:
- Premium quality
- Perfect finish
- Best in use
Other Details:
- Aerolam Premium METPET consist two layer of air bubble film laminated with both side coloured metalized film
Properties:
- Radiant heat barrier
- Prevent heat penetration
- Destroy condensation
- Efficient Vapor barrier
- High impact resistance
- Easy to use
- Prevent nesting for rodents, birds or bugs
Characteristics:
- Any metal building has a tendency to act as a tropical rain forest from inside. It acts typically during all different seasons. The moisture trapped within the fiberglass insulation will reduce the radiant energy and temperature drops dramatically as water is a very good conductor of the heat. As most of the metal used in latest infrastructure is treated, water penetrated between the insulation and surface cause major damage on longer run
- It creates rust, oxidation on the metal surface, molds and grows fungus inside the critical points: and gradually it will degrade the steel walls and shorten the life. Water condensation may also result into ruined crops and bacterial growth inside the building. And in this situation using fiberglass insulation is not recommended as it can create some serious issues
- The air infiltration through the building walls in moist areas will allow some amount of moisture to penetrate inside the insulation, and on a longer run it will degrade the insulation capabilities of the fiberglass. Thus such material is not recommended for metal structure
- Best insulation material should posses a characteristic of not providing enough space for the nesting. Rodents, birds and bugs don't like aluminum. AEROLAM™ thermal insulation not only prevents the effect of condensation but also provide efficient barrier against the issues related to nesting
- The process of insulation is quite simple. Simply roll out the insulation material out over your framing before applying your sheeting. You can use staple, glue or retrofit for metal building insulation. The insulation material is also light weight in nature
- Double bubble insulation material produced by AEROLAM™ is best for any metal building insulation in any weather condition. It has high quality of core strength which keeps itself in shape due to aluminum sheet when exposed into the exterior forces
- AEROLAM™ Insulation auto seals once it is fastened with screw or staple. It also helps to prevent water leakage when a roof is nailed to a structure
- Thanks to it’s high reflective value it has significant performance for temperature penetration and thermal condensation. It is by far the best material for the metal building insulation available
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Mundra
- Production Capacity: 500000 Squre meter Every month
- Delivery Time: 5 to 6 Weeks
Get Best QuoteRequest A Callback